ADINA System 9.1.3 X32/x64_设计资料_设计软件

ADINA软件是美国ADINA 公司的产品，也是唯一的产品，是基于有限元技术的大型通用分析仿真平台。公司的创始人以及软件的领导者之一，是美国麻省理工学院的K.J.Bathe教授，他也是国际有限元界着名科学家。
整个Adina系统只有200多M,但却包含完整的前后处理器以及求解器，并且求解器的功能涵盖从基本结构分析到流固耦合分析，实在让人觉得不可思议。
ADINA System 9.xx | 395.4 mb
ADINA R&D, Inc., a leading innovator in simulation software for solids, structures, fluids and fluid flows with structural interactions, has announced the release of the latest version of its popular ADINA System, version 9.0.
The ADINA System offers a one-system program for comprehensive finite element analyses of structures, fluids, and fluid flows with structural interactions. The analysis capabilities range from solving simple structural, heat transfer or fluid flow problems to solving complex multiphysics problems, all using the same program system.
- Displacement and stress analysis of solids and structures
- Heat transfer analysis
- Incompressible and compressible fluid flows
- Fluid-structure interaction (FSI)
- Thermo-mechanical coupling (TMC)
- Structural-pore pressure coupling (porous media)
- Thermal-fluid-structural coupling
- Electric field-structural coupling(piezoelectric)
- Thermal-electrical coupling (Joule heating)
- Acoustic fluid-structural coupling
- Fluid flow-mass transfer coupling
The ADINA User Interface (AUI) uses the Parasolid kernel as its geometry engine. Hence, users of NX and SolidEdge can easily import their Parasolid-based geometry models (parts and assemblies) into the AUI for meshing, apply geometry-based loads and boundary conditions and perform structural, heat transfer, fluid or coupled multiphysics analysis using the ADINA System.
ADINA can also import finite element models in Nastran format and output results in the Nastran op2 format. Users of NX, I-deas and Femap can therefore build their finite element models in their pre-processor, run the analysis with ADINA and post-process the results back in their environment.

About ADINA R&D, Inc.
ADINA R&D, Inc. was founded in 1986 by Dr. K.J. Bathe, a teacher and researcher, and associates. The exclusive mission of the company is the development of the ADINA System for linear and nonlinear finite element analysis of solids and structures, heat transfer, CFD and electromagnetics. ADINA also offers a comprehensive array of multiphysics capabilities including fluid-structure interaction and thermo-mechanical coupling. Some of the nonlinear structural analysis capabilities of ADINA are offered as Solution 601/701 of NX Nastran by Siemens PLM Software.
ADINA offers a wide range of capabilities based on reliable and efficient finite element procedures. For this reason, ADINA is often selected for applications where reliability is of critical importance, e.g., dynamic analysis of bridges for earthquake, biomedical applications, design of nuclear reactors, studies for safety.